Dictaphone Recordings Lost? How to Get Them Back

A digital voice recorder often holds the only copy of something that cannot be repeated: a client interview, a lecture, a meeting, dictated letters, a family member telling a story. So when a recording goes missing, will not play or the recorder stops showing up on your computer, it is worth slowing down before you press anything else. Most recorders store audio on ordinary flash memory, and in many cases the recording can still be recovered. This guide covers the common situations and the steps that give you the best chance.

Where your recordings are actually stored

Dictaphones and voice recorders from makers such as Olympus (now OM System), Sony, Philips and Zoom store recordings in one or both of two places:

  • Built-in memory: a flash chip soldered inside the recorder. Many pocket recorders have this as their main storage.
  • A memory card: usually microSD or SD. Some recorders record to the card by default once one is inserted; others let you choose in the menu.

Recordings are normally saved as MP3, WMA or WAV files, or in dictation formats such as DSS and DS2 on professional dictation machines. They sit in folders on a FAT or exFAT file system, just like photos on a camera card. That is why the usual memory card recovery techniques apply.

First: stop recording

Whatever has gone wrong, the most useful thing you can do is stop using the recorder or card straight away. Every new recording is written into free space, and free space is exactly where deleted or damaged recordings live. A few minutes of new audio can overwrite the file you are trying to save.

  • Do not make test recordings to “see if it is working”.
  • Do not format the card or the internal memory, even if the recorder or computer asks you to.
  • Do not use the recorder’s “delete all” or “erase folder” option to tidy up.
  • If there is a card, switch the recorder off and remove it before doing anything else.

Recording deleted by mistake

On most recorders, deleting a file removes its entry from the folder and marks its space as free, but the audio data stays in place until something overwrites it. If you deleted it recently and have not recorded since, the chances are reasonable. Check first whether your desktop software (such as Olympus Sonority, Philips SpeechExec or a dictation workflow app) has already downloaded a copy to your PC, as many are set to transfer recordings automatically when the recorder is connected.

File corrupt after the battery died

If the batteries ran flat or were removed during a recording, the file may show a length of zero, play only a few seconds or refuse to open. That usually happens because the recorder writes the file’s size and other details at the end of the recording, and it never got the chance. The audio itself is often still on the memory. Fit fresh batteries before switching the recorder on again, copy the files off as described below, and do not keep power cycling it in the hope it fixes itself.

Recorder or card reformatted

A quick format resets the file system tables but usually leaves the recorded data in place, so recovery is often possible if nothing new has been recorded since. A full format or a “secure erase” option, where the recorder has one, is much more likely to have overwritten the data.

Recorder not showing up on the computer

Most recorders appear as a removable drive when connected by USB. If yours does not:

  • Check the recorder is in the right USB mode; some models have a setting for storage versus charging only, or for use as a USB microphone.
  • Try a different USB cable. Many cables supplied with phones charge only and carry no data.
  • Try another USB port, or another computer.
  • If the recordings are on a card, take the card out and read it in a card reader instead.

If the recorder still is not seen, or the drive appears but asks to be formatted, close that prompt and stop. A “format” message means the file system cannot be read, not that the recordings have gone.

Copy everything before you try to fix anything

Once the recorder or card is visible on your computer, copy the entire contents, every folder, to your computer’s own drive before you open, play, repair or delete anything. Work on those copies, not the originals. If you plan to try recovery software, run it on a card that is no longer being used, and save the results to a different drive, never back onto the same card.

When to bring in a lab

Professional recovery makes sense when the recording matters and:

  • the card or recorder is not detected at all, or keeps disconnecting;
  • the card is cracked, bent or has been in water;
  • the recordings are on the recorder’s built-in memory and the recorder will not power on;
  • software has found nothing, or the files it recovered will not play.

We recover data from memory cards and flash media of all kinds, as well as from cameras and phones; see our flash, camera card and external drive recovery page. If the card is a SanDisk microSD or SD, our SanDisk data recovery page has more on those cards. When you send it in, include a note of roughly when the recording was made, how long it was and what has happened since, as this helps us find the right file quickly.

Talk to us

If an important recording is missing or will not play, stop recording on that device and call Data Retrieval on 020 7064 4996. We offer a free assessment with no obligation, or you can request a quote online.